Find a Dealer
Find your closest dealer410 Microlight is the ideal low-density filler for creating a light, easily-worked fairing compound especially suited for cosmetic or surface applications like shaping, filling or fairing. 410 Microlight mixes to a very smooth creamy texture that can be trowelled to a feather edge, and is less porous than other filling compounds
READ MORE417 Low Density Filler
417 is a low density microballoon-based filler used as a thickening agent with epoxy fairing systems to make fairing putties that are easy to sand or carve. 417 has a reasonably strong strength to weight ratio, and is recommended as the preferred filler under dark coloured surfaces.
READ MOREG/flex® 650
G/flex® 650 is a toughened epoxy adhesive that is simple to use, viscous enough not to drain out of a joint, and is resilient enough to absorb the stress of expansion, contraction, shock and vibration. It offers superior adhesion to a variety of materials including aluminium and other metals, plastics, fibreglass, ceramic, masonry, glass, damp […]
READ MORE105 Resin
WEST SYSTEM 105 Resin is a low viscosity, solvent free liquid marine epoxy resin. Formulated for use with WEST SYSTEM hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance. 105 is designed specifically to wet -out and bond with wood-fiber, fiberglass, reinforcing fabrics and a […]
READ MORE205 Fast Hardener
205 Fast Hardener is used, in the majority of situations, at lower temperatures to produce a rapid cure that develops its physical properties quickly at room temperature. Cured resin and hardener yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Not intended for clear coating.
READ MORE206 Slow Hardener
206 Slow Hardener is used when extended working and cure time is needed, or to provide adequate working time at higher temperatures. Cured resin and hardener yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Not intended for clear coating.
READ MORE207 Special Clear Hardener
207 Special Clear Hardener has been specially developed for coating applications where a moisture resistant, natural wood finish is desired. 105/207 mixtures resist clouding in humid conditions and exhibit extremely low blush formation – as low as any epoxy, including so-called “no-blush” epoxies. 105/207 has strong physical properties, so it can be used as a […]
READ MORE209 Extra Slow Hardener
209 Extra Slow / Tropical Hardener is formulated for general coating and bonding applications in extremely warm and/or humid conditions, or when extended working time is desired at room temperature. Not intended for clear coating.
READ MORE301 High Volume Pumps
For dispensing large metered quantities the 301 FRP Pump is a single action, double cylinder, high capacity pump, designed to dispense WEST SYSTEM resin and hardener from drum quantities at the designated 5:1 ratio, and reduce mixing time and waste.
READ MORE301 Mini Pumps
301 Mini Pumps are calibrated to deliver the correct working ratio of 5 parts of 105 resin to 1 part of either 205 Fast or 206 Slow hardeners. Made of durable polypropylene, the pumps give years of dependable service. Pumps may be left in containers during storage.
READ MORE