ATL composites
West System
  • Home
  • About Us
  • Products
    • Resin and Hardeners
      • R105
      • H205
      • H206
      • H207
      • H209
    • Dispensing Pumps
      • 301 & 303 Mini
      • 301 High Volume
    • Fillers
      • 403 Microfibre Blend
      • 410 Microlight
      • 411 Microsphere Blend
    • Additives
      • 421 Fire Retardant
      • 422 Barrier Coat
      • 423 Graphite Powder
      • 501/502 Pigments
    • Publications
      • User Manual
      • The Gougeon Brothers on Boat Construction
      • Wooden Boat Restoration & Repair
      • Fibreglass Boat Repair & Maintenance
      • Gelcoat Blisters: Diagnosis, Repair & Prevention
      • Final Fairing & Finishing
      • Vacuum Bagging Techniques
      • Other Uses
  • Basic Techniques
    • Epoxy Safety
    • Clean Up
    • Epoxy Chemistry
    • Dispensing and Mixing
    • Adding Fillers and Additives
    • Surface Preparation
    • Bonding
    • Fairing
    • Apply Fibreglass and Tapes
    • Epoxy Barrier Coating
    • Final Surface Preparation
    • Final Coatings
    • Cold Weather Bonding
    • Application & Technical Data Sheets
  • Professional
    • Projects
      • International Eight Metre Class
      • 19.9m Long Range Cruiser
      • 15.1m Luxury Long Range Cruiser
      • Spirited 380
      • Iain Oughtred 19' Yawl
      • 24m Commercial Ferry
    • Performance Data
      • Fatigue
      • Cold Temperature Bonding
      • Moisture Exclusion Effectiveness
      • Creep Rupture
    • Technical Support
  • Amateur
    • Projects
      • Strip Planked Sea Kayak
      • 9 metre Race Yacht
      • 10.8 metre Racer Cruiser
      • Chris Craft Classic
    • Repair and Maintenance
  • News
    • News 2009-2010
    • News 2007-2008
    • News 2005-2006
    • News 2003-2004
    • News 2000-2002
  • Australian Dealers
  • Asian Distributors
  • Contact Us

FAQ

  • What is the best technique for installing hardware on my boat ?
  • Can I repair a polyester boat with WEST SYSTEM ?
  • How do I add fillers to my epoxy ?
  • Are there special techniques for  bonding in cold weather ?
Home » Products » Dispensing Pumps »

Dispensing Pumps

WEST SYSTEM brand Dispensing Pumps are designed for convenient and accurate metering of WEST SYSTEM brand resin and hardeners.  For convenience, the pumps mount directly onto the Resin and Hardener containers, and eliminate the mess involved with measuring by weight or volume.

Made of durable polypropylene, the pumps give years of dependable service.  Pumps may be left in containers during storage.  Read and follow the priming, ratio verification and operating instructions  included with the pumps.

Created by Beyondedge
  • Privacy Statement
  • Copyright Notice
  • ATL Composites
  • © 2007 WEST SYSTEM ®

© 2007. WEST SYSTEM ® brand is a registered trademark of Gougeon Brothers Inc, USA.   Site Admin